TrojanUV3000PTP

A cost-effective, off-the-shelf solution for small wastewater treatment plants

Simple and Reliable Wastewater Treatment

The TrojanUV3000®PTP (Packaged Treatment Plant) is ideally suited to treat flows up to 3 MGD (473 m³/hr). It is pre-engineered for quick, economical installation and is designed with proven components to provide a dependable UV solution for small wastewater treatment applications.

Key Features and Benefits

A photo of a TrojanUV3000PTP installation at a wastewater treatment plant in Ontario, Canada

Flexible Installation Options

The TrojanUV3000PTP can be installed into existing chlorine contact tanks and effluent channels. It comes pre-tested, pre-assembled and pre-wired to minimize installation costs, and can also be equipped with prefabricated stainless-steel channels with built-in weirs. Channels are easily integrated with existing flanged piping using transition boxes.

Compact Modules

Space-saving electronic lamp drivers are housed right in the modules, not in separate external cabinets – this minimizes the footprint of the UV system and eliminates the need for air-conditioning. Lamp drivers are cooled by convection and each UV module includes a UV lamp status indicator for at-a-glance monitoring.

A photo of an operator removing a lamp driver from a TrojanUV3000PTP module

A photo of an operator replacing a UV lamp from a TrojanUV3000PTP module

Operator-friendly Maintenance

Modules are lightweight and can be individually removed for periodic sleeve cleaning and lamp change-outs. An optional mobile cleaning rack simplifies maintenance procedures.

Proven Performance, Components and Design

The TrojanUV3000PTP has been validated through microbial testing. Through this testing, performance data has been generated for UV dose delivery to inactivate microorganisms Escherichia coli (E. coli ) and fecal coliform.

Is your wastewater treatment plant's flow rate 3 to 5 MGD? If so, the TrojanUV3000^®B is another option you should consider. Learn more

A photo of the TrojanUV3000PTP system with a module lifted out of a stainless-steel channel

System Specifications

System Characteristics	TrojanUV3000PTP
Typical Applications	Up to 3 MGD (473 m3/hr)
Lamp Type	Low-pressure
Lamp Driver Type	Electronic; non-variable
Input Power Per Lamp	45 or 87.5 Watts
Lamp Configuration	Horizontal, parallel to flow
Module Configuration	2 or 4 lamps per module
Bank Configuration	Up to 10 modules per bank
Channel Configurations
Lamp Banks in Series	Up to 2
Channel Options	Stainless Steel (Trojan option) or Concrete (by others)
Flanged Transition Connections	Optional for stainless steel channels
U-Turn Connector Box	Optional for stainless steel channels
Level Control Device Options	Fixed weir
Enclosure Ratings
System Monitor/Control Center	Fibreglass
Lamp Driver Enclosure	TYPE 6P (IP67)
Lamp Driver Cooling Method	Convection; no air conditioning or forced air required
Installation Location	Indoor or outdoor
System Monitoring & Controls
Controller	Optional; Monitoring only
UV Intensity Monitoring	Optional
Inputs Required	None
Local Status Indication	Lamp Age (hours) UV Intensity (mW/cm²)
Remote Alarms	UV Intensity (4-20 mA)
Location	Indoor or outdoor
Maximum Distance from UV Channel	15 ft. (4.5 m)
Electrical Requirements
Power Distribution	Individual GFI Receptacles
Quantity Required	1 receptacle per 2 modules
Power Input	120V, single phase